Product Features List

All wood framed chairs and luggage benches produced by Eaton are manufactured using kiln dried hardwood.  Wood joints are double doweled and glued with epoxy type glue to increase strength and add durability.  When stronger bonds are necessary on critical joints, pocket boring and screws are used.  Corner blocks are attached with both glue and screws.  Metal brackets are also utilized when necessary.  Seats are offered as poly covered solid boards or poly covered spring flex boards.  Typical poly applications for seat foam have density of 1.8 and compression of 45lbs.  Back foam has a density of 1.8 and a compression of 26lbs.  Wood chair frame components carry a 2 year limited warranty.

Because of the wide variety of styles offered, frame construction for task chairs varies.  When applicable, task chairs are manufactured with 11 gauge sinuous back springs and 8 gauge flat sinuous seat springs.  Standard poly foam for task chairs has a density of 1.8 and a compression of 45 lbs.  Standard mechanisms have single position tilt lock with tilt tension adjustment and pneumatic seat height adjustment.  Moving components on task chairs carry a two year limited warranty, while non moving frame components carry a three year, limited warranty.

All recliners frames are manufactured primarily of plywood.  Frames are GSA approved to meet or exceed tests of strength and durability.  These test results are available upon request.  Back springs are typically 11 gauge sinuous springs while seat springs are 8 gauge flat sinuous springs.  Recliner mechanisms are contract grade, wall saver style mechanisms.  Standard poly foam for recliner seats has a density of 1.8 and a compression of 30lbs.  Inside back poly foam has a density of 1.5 and a compression of 16lbs.  Fiber wrap on recliner seats cushions is typically 1” thick, has a density of 1.1, and a compression of 12lbs.  This upgraded fiber prevents loss of seat cushion height, and prevents fabric from becoming loose on the cushion.  The balance of poly foam used on the chair carries a density of 1.0 and a compression of 30lbs.  All recliner wood frames carry a two year limited warranty.

All poly foam used in our product is warranted to retain 85% of its memory for 2 years.  Cal 117 is the standard specification, and Boston 133 is also available.

The construction of ottoman frames varies depending on styling, but frames are typically manufactured out of plywood or hardwood, with very few exceptions.  Poly covered solid seat boards are utilized, as are poly covered webbing tops.  Standard poly foam for ottomans has a density of 1.8 and a compression of 30lbs.  Ottomans carry a two year limited warranty.

FULLY UPHOLSTERED LOUNGE CHAIRS AND SOFAS/SOFA SLEEPERS
All fully upholstered items are manufactured using a mixture of hardwood and plywood.  Hardwood is used exclusively on structural portions of the frame, while plywood is used on non-structural parts with very few exceptions.  Exposed legs over 2 ¾” tall are integrated into the frame to increase strength and add durability versus bolt or screw on applications utilized on inferior products.  Back springs are typically 11 gauge sinuous springs while seat springs, when applicable, are 8 gauge flat sinuous springs.  Sleeper mechanisms are available in three quality levels, each carrying a different warranty period starting at three years for the standard mechanism and reaching five years for the professional series mechanism.  A variety of mattresses are also available with various types of foam and varying coil counts.  Standard poly foam for seat cushions has a density of 1.8 and a compression of 30lbs.  Inside back poly foam has a density of 1.5 and a compression of 16lbs.  Fiber wrap on seat cushions, when applicable, is typically 1” thick, has a density of 1.1, and a compression of 12lbs.  This upgraded fiber prevents loss of seat cushion height, and prevents fabric from becoming loose on the cushion.  The balance of poly foam used on the chair carries a density of 1.0 and a compression of 30lbs.  All fully upholstered chair frames carry a two year limited warranty.

Eaton Seating has been providing custom wood finishes for over 20 years.  All products with exposed wood are stained in-house using water based stain with catalyzed conversion finish.  A nine step spraying process and numerous quality checks ensure consistent top quality results.  Choose from one of our standard finishes or provide a sample to match.  Custom finishes require approval before they are placed into production to ensure customer satisfaction.

Our fabrics meet or exceed all industry fabric standards.

We will also accept COM orders if you so choose.