Features
WOOD FRAMED CHAIRS
All wood framed chairs and luggage benches produced by Eaton are manufactured using kiln dried hardwood. Wood joints are double doweled and glued with epoxy type glue to increase strength and add durability. When stronger bonds are necessary on critical joints, pocket boring and screws are used. Corner blocks are attached with both glue and screws. Metal brackets are also utilized when necessary. Seats are offered as poly covered solid boards or poly covered spring flex boards. Typical poly applications for seat foam have density of 1.8 and compression of 45lbs. Back foam has a density of 1.8 and a compression of 26lbs. Wood chair frame components carry a 2 year limited warranty.
TASK CHAIRS
RECLINERS
OTTOMANS
POLY FOAM
FABRIC
FULLY UPHOLSTERED
FULLY UPHOLSTERED LOUNGE CHAIRS AND SOFAS/SOFA SLEEPERS
All fully upholstered items are manufactured using a mixture of hardwood and plywood. Hardwood is used exclusively on structural portions of the frame, while plywood is used on non-structural parts with very few exceptions. Exposed legs over 2 ¾” tall are integrated into the frame to increase strength and add durability versus bolt or screw on applications utilized on inferior products. Back springs are typically 11 gauge sinuous springs while seat springs, when applicable, are 8 gauge flat sinuous springs. Sleeper mechanisms are available in three quality levels, each carrying a different warranty period starting at three years for the standard mechanism and reaching five years for the professional series mechanism. A variety of mattresses are also available with various types of foam and varying coil counts. Standard poly foam for seat cushions has a density of 1.8 and a compression of 30lbs. Inside back poly foam has a density of 1.5 and a compression of 16lbs. Fiber wrap on seat cushions, when applicable, is typically 1” thick, has a density of 1.1, and a compression of 12lbs. This upgraded fiber prevents loss of seat cushion height, and prevents fabric from becoming loose on the cushion. The balance of poly foam used on the chair carries a density of 1.0 and a compression of 30lbs. All fully upholstered chair frames carry a two year limited warranty.
Eaton Seating has been providing custom wood finishes for over 20 years. All products with exposed wood are stained in-house using water based stain with catalyzed conversion finish. A nine step spraying process and numerous quality checks ensure consistent top quality results. Choose from one of our standard finishes or provide a sample to match. Custom finishes require approval before they are placed into production to ensure customer satisfaction.
Brushed Nickel
Black
Bronze
Aluminum
Metal Furniture Leg LR4735 Brushed Nickel
SKU: LR4735B
• Metal Leg
• 5″ x (2.75″-2″)
Metal Furniture Leg LR5022 Brushed Nickel
SKU: LR5022B
• Metal Leg
• 5″ x (2.25″-1.25″)
Metal Furniture Leg LR4520 Nickel or Brushed Nickel
SKU: LR4520
• Metal Leg
• 4.5″ x (3.5″-1.875″)
Metal Furniture Leg LR3520 Nickel
SKU: LR3520A
• Metal Leg
• 3.625″ x (2.75″-2″)
Metal Furniture Leg LR4025 Nickel or Brushed Nickel
SKU: LR4025
• Metal Leg
• 4″ x (3.75″-2.375″)
Metal Furniture Leg LR5129 Brushed Nickel
SKU: LR5129B
• Metal Leg Brushed Nickel
• 5″ x ( 3″ – 1″ )
Metal Furniture Leg LR5253 Nickel
SKU: LR5253A
• Metal Leg Nickel ( Shiny Chrome )
• 5.25″ x ( 5.25″ – 1″)
Metal Furniture Leg LR5318 Nickel
SKU: LR5318A
• Metal Leg Nickel ( Like Chrome )
• 5.375″ x ( 1.75″-1.75″)
• 5/16-18 Hanger bolt
Metal Furniture Leg LR7014 Nickel
SKU: LR7014A
• Metal Leg Nickel ( Like Chrome )
• 7″ x ( 1.35″ – 1.35″ )
Metal Furniture Leg LRQ2524 Nickel
SKU: LRQ2524A
• Metal Leg Nickel
• 2.4″ High, 1″ Wide
Metal Furniture Leg LRQ3840 Brushed Nickel
SKU: LRQ3840C
• Metal Leg Brushed Nickel
• 4″ High, 1.5″ Wide
Metal Furniture Leg LRQ3850 Brushed Nickel
SKU: LRQ3850C
• Metal Leg Brushed Nickel
• 5″ High, 1.5″ Wide
Metal Furniture Leg LRQ3860 Brushed Nickel
SKU: LRQ3860C
• Metal Leg Brushed Nickel
• 6″ High, 1.5″ Wide
Metal Furniture Leg LRQ3870 Brushed Nickel
SKU: LRQ3870C
• Metal Leg Brushed Nickel
• 7″ High, 1.5″ Wide
Metal Furniture Leg LRQ3880 Brushed Nickel
SKU: LRQ3880C
• Metal Leg Brushed Nickel
• 8″ High, 1.5″ Wide
Metal Furniture Leg LRT2640 Nickel Round
SKU: LRT2640A
• Metal Leg Nickel Round ( Like Chrome )
• 4″ High, 1″ Wide
Metal Furniture Leg LRT2648 Nickel Round
SKU: LRT2648A
• Metal Leg Nickel Round ( Like Chrome )
• 4.8″ High, 1″ Wide
Metal Furniture Leg LRT3648 Nickel Round
SKU: LRT3648A
• Metal Leg Nickel Round ( Like Chrome )
• 4.8″ High, 1.25″ Wide
Metal Furniture Leg LRT5032 Brushed Nickel Round
SKU: LRT5032C
• Metal Leg Brushed Nickel Round
• 3.2″ High, 2″ Wide
Metal Furniture Leg LRT5040 Brushed Nickel Round
SKU: LRT5040C
• Metal Leg Brushed Nickel Round
• 4″ High, 2″ Wide
Metal Furniture Leg LRT5060 Brushed Nickel Round
SKU: LRT5060C
• Metal Leg Brushed Nickel Round
• 6″ High, 2″ Wide
a Customer's Own Material (COM)
Eaton wants to help you with your upholstery needs. If your choice does not include upholstery from our swatch cards, let us know. *We will source out your upholstery selection and quote cost both by grade and by COM so you can decide which option is best for you. When applying more than one fabric to a product, there may be a 10% upcharge per item.
COM yardage requirements shown on the price list are based on 54” non-directional/railroaded fabrics. When COM has a stripe, plaid, or any pattern that needs to be matched, or is of non-stretch construction, additional yardage may be required (see chart below for estimated yardage required). For pricing purposes the Fully Upholstered items have two COM pricing columns: COM1 is for plain, non-matched railroaded patterns; COM2 is for matching stripes, plaids, etc.
Additional Yardage Requirements:
| Fabric | Plain | 2” – 10” | 11” – 20” | 21” – 30” | 31” – 40” |
|---|---|---|---|---|---|
|
Width |
Fabric |
Repeat |
Repeat |
Repeat |
Repeat |
|
54″ |
0% |
15% |
25% |
35% |
45% |
Send all COM materials freight prepaid to the factory. The outside package must be marked with purchaser’s name, purchase order number, pattern & color, and any other special notations needed. Orders with COM are scheduled for production when all COM is received at the factory. EATON SEATING CANNOT ASSUME RESPONSIBILITY FOR EXACT YARDAGE REQUIREMENTS FOR EITHER PLAIN OR PATTERNED FABRIC. Unless special instructions are provided with the COM, i.e., running stripes horizontally or vertically, or right side when fabric appears to be reversible and is difficult to determine which the correct side is, etc. will be applied by the factory at our discretion with no liability for so doing. Eaton Seating does not accept responsibility for determining quality, defects, or accuracy of yardage of COM. Excess COM will not be returned unless requested on the original order.
SEND ALL COM FABRIC FREIGHT PREPAID TO:
EATON SEATING, 263 WEST COFFEE ST., PONTOTOC, MS 38863.
Care & Cleaning Tips
Comparison Chart
Finishing Systems
SHER-WOOD KEMVAR Plus
2 OUTLET UNIT WITH USB CHARGING STATION HAS A 14-3 HEAVY DUTY RIGHT ANGLE POWER CORD. 2.1 CHARGE CAPABILITY. 12AMP MAXIMUM RATING WITH ul.
POWER OPTIONS AVAILABLE UPON REQUEST
Contact Us for information on power options for electronic devices on your custom seating order.
Sofa Sleeper System
Sofa Sleeper Mattresses
